15.6" Capacitive Touchscreen IPS LCD (H) with Case (1920x1080) Colour_Red The target is released after

The target is released after leaving the USB-ProxSonar-EZ detection zone

Mounting Hole: 4-M4

you will be interacting with the Mynewt RTOS rather than Arduino

This module is configured by default to output GPS strings in the NMEA format at a 1Hz update rate (this can be changed to a 5HZ updated with an NMEA command)

which includes the following:

15.6" Capacitive Touchscreen IPS LCD (H) with Case (1920x1080) Colour_Red The target is released afterThis 15. 6" IPS display is ideal for use with the Raspberry Pi 400 as a permanent on desk screen option, but compact enough to take on the go if needed. Thanks to the universal full size HDMI input and USB touch port, you can also use this with a Raspberry Pi 4, Windows PC, games console, Jetson Nano and other HDMI USB devices. The display is a 1920x1080 IPS panel with capacitive 10 point touch (device and OS dependent), toughened glass and wide 178