V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder Instead of doing that simply

Instead of doing that simply unbolt your factory coolant neck and install this spacer in between the neck and the head

by using stackable shims it allows you to further increase adjustment by + or -1 degree of caster

Takeshi Teruya

NOTE: If your subframe does not have HICAS please use our S14/S15 version seen: https://au

5 degrees of camber and as high as +1 degrees on a low car

V2 Z33 350z/Z34 370z gearbox cross member for S-Chassis Slave Cylinder Instead of doing that simplyThe V2 GKTECH Z33 350Z Z34 370z gearbox cross member has been designed as a bolt on solution when fitting these gearboxes to an S chassis when running either an SR20 KA24 motor. The gearbox cross member has been designed to use an OEM S13 S14 gearbox mount such as our polyurethane solid mount that we also make, seen here; Solid S13 S14 S15 R32 GTS T SKYLINE BILLET ALUMINIUM SOLID GEARBOX MOUNT Polyurethane V2 POLYURETHANE GEARBOX MOUNT 6mm steel