Remco 7 GPM 100 PSI Demand Pump Softwash Roof Wash Pump 1/2" FPT SPARK PLUGS The unloader is set at

The unloader is set at a spike pressure of 200 PSI above the operating pressure of the pump and is meant to be left alone

SKU: 5280

1/2" and 1" Pumps (Slightly Quieter Than Grey)

No springs to change less "whistling" and chatter over competing brands

Temperature: -15 F (-26 C) to + 150 F (+65 C) continuous service

Remco 7 GPM 100 PSI Demand Pump Softwash Roof Wash Pump 1/2" FPT SPARK PLUGS The unloader is set atDo not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery. Tested at the factory and will have water in the pump Please choose UPS FedEx to ship this product. We will not use USPS. Thank you. Remco 7 gpm 100 psi on demand should be powered by a deep cycle marine battery. We recommend using 8 gauge wire, a 30 amp waterproof switch and