Tormek Ezy Lock Nut for T-7 / T-8 Professional Machine the Drill Doctor 750X sharpens

the Drill Doctor 750X sharpens standard-twist bits ranging from 3/32"-3/4" and will also sharpen carbide

Step 6 - Repeat this process until edge is sharp then progress to finer stones and repeat

When you finish with one grit stone

5 degrees if scissor sharpening if your need

After sharpening with the diamond wheel the honing wheel will easily remove the burr and leave a polished

Tormek Ezy Lock Nut for T-7 / T-8 Professional Machine the Drill Doctor 750X sharpensTormek Ezy Lock Nut A replacement Ezy Lock Nut for the T 7 T 8. Note that the Ezy Lock Nut is not compatible with older model shafts. If your machine originally had an EzyLock Nut, then this will replace a lost or damaged one. If your machine did not originally have an Ezy Lock Nut and you wish to upgrade, then see the Tormek MSK 250 Stainless Steel Shaft, which will fit Supergrind, T 7 and T 8 machines and which comes with an Ezy Lock Nut. AKA EZ 250