3/8" All-Flo Lip Seal Set for 3/8" Diaphragm Rod Nitrile 12005-76 BYPASS KIT This is for the 8

This is for the 8 gpm 4000 psi unit with the iGX800

Note: Thermostat will not reset until all components surrounding it have cooled sufficiently

Kit 44 Piston Rod Oil Seal Kit

Burner: wire to terminal #4

1/2" FPT Inlet

3/8" All-Flo Lip Seal Set for 3/8" Diaphragm Rod Nitrile 12005-76 BYPASS KIT This is for the 83 8" All Flo lip seal set 3 8" diaphragm rod nitrile 12005 76. You will only receive two lip seals. If you blow your diaphragms, you may want to purchase two of these lip seals. Watch Rex, the Pump Guru, install the 3 8" air valve. "Rex the Pump Guru installs the 3 8" air valve on All Flo pump" Reminder: Regulator supplied by PWP should be set to 80 psi maximum. Use anti seize when reassembling the pump.