ATI Performance Products Powerglide UNniversal Lever Single Turbo Most electrical components can be

Most electrical components can be tested at the bench before sending a replacement — confirm the pump is getting 12V power at the connector before assuming it's defective

5mm of lift and requires valve springs upgrade

Damping Levels 16-Level Height Adjustment Yes Spring Rate(Front) 12 kg/mm (672 lbs/inch) Spring Rate(Rear) 12 kg/mm (672 lbs/inch) Spring Length(Front) 140 mm Spring Length(Rear) 220 mm Front Top Mount Yes

What preparation does the cover need before installation

Designed as a straightforward swap with no modification required

ATI Performance Products Powerglide UNniversal Lever Single Turbo Most electrical components can beThe ATI Universal Lever is designed for use on aluminum Powerglide transmissions without the throttle lever and shaft. It is a two piece lever rather than the usual one piece lever. It has 4 holes for the cable swivel so that it can be used with B&M, Turbo Action or Hurst shifters. The shaft portion of the lever is installed in the transmission in the normal Powerglide manner. The lever is then put over the end shaft with the lever pointing down (for