Monochrome 0.96" 128x64 OLED Graphic Display - STEMMA QT Brand_Hakko The board includes pre-soldered 5V

The board includes pre-soldered 5V level shifters

This is a lot like our 3mm pitch 64x32 RGB LED matrix panel

Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins

Connects to the Raspberry Pi using a ribbon cable connected to the DSI port

the SKC are more reliable and handle accidental over-volting a little better

Monochrome 0.96" 128x64 OLED Graphic Display - STEMMA QT Brand_Hakko The board includes pre-soldered 5VThese displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! This