Victron Autotransformer - Split Phase 120/240V - 100AMP [ITR000100101] Lighting | Interior / Courtesy Light A residual current of 10mA

A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days

When the thumbprint is in the noon position

This wide range of communication interfaces makes the ChargeMaster Plus ideally suited for system integration

Start Isolation (SI)-Can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics

Raw Lumens: 9504

Victron Autotransformer - Split Phase 120/240V - 100AMP [ITR000100101] Lighting | Interior / Courtesy Light A residual current of 10mAAutotransformer Split Phase 120 240V 100AMP The Autotransformer: for step up, step down and split phase balancing An autotransformer can be used for step up, step down and split phase output balancing purposes. While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention. Consider for example a 30A 120 240V split phase supply. The supply could be the grid, a generator or two stacked