LPCXpresso LPC1347 Development Board with LPC-Link [Discontinued] Brand_NEWlink Green "ON" LED so you

Green "ON" LED so you know its powered

You can enable I2C by opening a terminal window and entering 'sudo raspi-config' and hitting enter

It is used to power a Raspberry Pi via an Ethernet cable

Its extensive relay capacity

80″ × 1

LPCXpresso LPC1347 Development Board with LPC-Link [Discontinued] Brand_NEWlink Green "ON" LED so youThe LPC1347 LPCXpresso board is part of NXP's LPCXpresso eco system of low cost development boards based around the free (GCC and Eclipse based) LPCXpresso IDE. All LPCXpresso boards include an on board hardware SWD JTAG debugger, so you don't need any additional hardware (other than a USB mini B cable) to start some serious debugging (including setting and stepping through breakpoints, etc.). The LPCXpresso boards are actually two separate boards,