Harley-Davidson® Batwing Fairing Repair Kit - 3 Brass Inserts (Part# 16585-96) Batwing Fairing Repair Easy to follow installation instructions

Easy to follow installation instructions

These are the correct length for mounting boards 3/4” thick

Stainless Steel threaded studs

The other four (4) screws are a replacement for the two inner fairing Torx screws below the speakers on the left and right side of the fairing and the other two (2) screws are used at the lower part of the inner fairing between the forks

Pictures are for reference

Harley-Davidson® Batwing Fairing Repair Kit - 3 Brass Inserts (Part# 16585-96) Batwing Fairing Repair Easy to follow installation instructionsThe NEW Red T Handle design will give you a much easier to use the installation tool. Its wider and is slightly longer than the previous Black installation tool. It will give you better leverage to tap the replacement Brass Inserts (H D Part# 16585 96) into the inner fairing. The factory press in inserts pulling out or spinning is not an uncommon occurrence and quite often needs replacing at one time or another. Easy enough to use on the road in an