3 Ports 1/2" Valved Manifolds with Compression Joint Branch for Copper/Pex extension They comply with the requirements

They comply with the requirements of EN1253-1:2015 (when tested in conjunction with a separate water seal of 50mm depth)

Replast Plastic Compression Fittings Technical Data Sheet

then the rubber gasket can fit inside 110mm pipe

The insulation is made of expanded polyethylene with closed-cells

- 2" BS EN 1329-1:2020 Solvent Weld Horizontal Outlet

3 Ports 1/2" Valved Manifolds with Compression Joint Branch for Copper/Pex extension They comply with the requirementsDESCRIPTION: Manifold are used to distribute pipe work to different locations around the building, they are used both in potable water and heating systems. All manifolds have either 2, 3 or 4 ports which have a 1 2" or 10mm (un valved only) compression fitting connection at the outlet. There is a 3 4" Male Female threaded connection at either end allowing the possibility of joining the manifolds together. The valve heads have a reversible red and blue